บทความทางวิชาการ

Lertnuwat, B. 2022 THE EFFECTS OF WINGLET VORTEX GENERATOR POSITION IN RECTANGULAR-DUCT-TYPE SOLAR AIR HEATER, Frontiers in Heat and Mass Transfer (FHMT).

Chancharoen, R., Chaiprabha, K., Tantrapirom, K., Tangthavonsirikul, S., Jitanaknan, T.,February 25 2022, A Reliable Real-Time Web Interface for an Online Laboratory, Lecture Notes in Networks and Systems, 2022, 298, pp.35-46 .

Nantapak T., Srisarakorn K., Tantipiriyapongs T., Deecharoen N., Ratanasumawong C., January 31 2022, The Empirical Formula for the Stiffness of a Spur Gear Pair Based on Finite Element Solutions, Engineering Journal Vol.26 No.1 (2022), ISSN/eISSN 0125-8281, Impact Fator 0.25.

Thonghong S., Sinananpat P., Chatsuwan T., Srisawat N., Insin N., Salakij S., Boonyasuppayakorn S., 2022., An Extracorporeal Plasma Filtration Column with Specific Binding to Dengue Virions., Blood Purification (2022) May 5:1-8. Doi: 10.1159/000524387., ISSN 0253-5068.

Ashfaq M., Talreja N., Chauhan D., Afreen S., Sultana A., Srituravanich W., 2022., Journal of Drug Delivery Science and Technology., Volume : 70., Impact Factor 3.981.

Pitakawatchara P., Arunrat J., July 2022., Manipulation planning using wave variables ., IEEE Robotics and Automation Letters., Volume : 7, No 3, pp,6179-6186.

Plengkham S., Kukiattikoon C., Phanomchoeng G., Boonyasuppayalorn S., 2022., Development of an Automated Viral Plague Assay Program and ELISpot Counting Program on 96-Well Plate Platform., Proc. Of the International Conference on Electrical, Computer and Energy Technologies (ICECET 2022).

Lertnuwat B., 2022., The effect of the hole position on trapezoidal winglet vortex generators in a rectangular-duct-type solar air., Journal of Mechanical Science and Technology., ISSN: 2151-8629.

Kopylov S., Phanomchoeng G., Ambrož M., Petan Z., Kunc R., Qiu Yl., 2022., Improvements to a vehicle’s ride comfort by controlling the vertical component of the driving force based on in-wheel motors., Journal of Vibration and Control., Impact Factor 2.633

Supanirattisai P., U-Yen K., Pimpin A., Srituravanich W., Damrongplasit N., 2022., Smart Agriculture Monitoring and Management System using IoT enabled Devices based on LoRa WAN., 37 th International Technical Conference on Circuits/Systems, Computers and Communications (ITC-CSCC) ., IEEE Xplore ., หน้า 679-682 ซึ่ง , doi: 10.1109/ITC-CSCC55581.20022.98945956.

Kukiattikoon C., Vongsoasup N., Ajavakom N., Phanomchoeng G., 2022., Automate platform for Capturing and Counting ELISpot on 96-Well Plate., 7 th International Conference on Engineering and Emerging Technologies.

Plengkham S., Kukiattikoon C., Phanomchoeng G., Boonyasuppayalorn S., 2022., Development of an Automated Viral Plaque Assay Program and ELISpot Counting Program on 96-Well Plate Platform., Proc. of the International Conference on Electrical, Computer and Energy Technologies (ICECET 2022).

Kopylov S., Phanomchoeng G., 2022 Improvements to a vehicle ‘s ride comfort by controlling the vertical component of the driving force based on in-wheel motors., Journal of Vibration and Control.

Phanomchoeng G., Kukiattikoon C., Plengkham S., 2022 Machine-learning-based automated quantification machine for virus plaque assay counting., PeerJ Computer Science .

Pai Oo T., Jeamsaksiri W., Pimpin A., Chalermwisutkul S., 2022., Optimization of Interdigital Capacitive Sensor for Cell Culture Plate., 19th Int. Conference on Electrical Engineering/Electronics, Computer, Telecommunication and Information Technology.

Thuwanut P., Pimpin A., Thatsanabunjong F., Srisuwatanasagul S., Sereepapong W., Sirayapiwat P., 2022., A modified hydrostatic microfluidic pumpless device for in vitro murine ovarian tissue culture as research model for fertility preservation., Obstetrics & Gynecology Science (SJR Q3) Volume 65, Issue 4, Pages 376-381.

Wannarong D., Singhanart T., 2022., A review of Sandwich Composite Structures with 3D Printed Honeycomb Cores., Engineering Journal, Volume 26, Issue 6, Page 27-39., ISSN: 01258281.

Asavalertpalakorn S., Singhatanadgid P., Ardsomang T., 2022., Novelty Detection of a Rolling Bearing Using Long Short-Term Memory Autoencoder., 37 th International Technical Conference on Circuits/System, Computers and Communications.

Noosawat P., Srituravanich W., Damrongplasit N., Suzuki Y., Kaewthamasorn M., Pimpin P., 2022., A microfluidic device for capturing malaria-infected red blood cells by magnetophoretic forec using an array of V- and W-shaped nickel microstructures., Microfluidics and Nanofluidics (SJR Q2)., Vol,26 article no.78 .

Sonridhi P., Prasertarp S., Somboon P., Pimpin A., 2022., Development of microfluidic system for malaria detection using impedance measurement., APCOT.

Sonridhi P., Prasertarp S., Somboon P., Pimpin A., 2022., Development of microfluidic system for malaria detection using impedance measurement., APCOT.

Singhanart T., Wannarong D., 2022., Elastic Bending Behaviour of Sandwich Composite Structures with ABS Cores by using Additive Manufacturing., Proceedings of The IIIER International Conference, Bangkok, Thailand, 05-06 July.

Palasuwana, D., Chalidabhongseb,T., Chancharoend, R., Palasuwana, A., Kobchaisawatb, T. and Phanomchoeng, G. May 17,2021 G6PD diaxBox: Digital Image-Based Quantification of G6PD Deficiency, Talanta.

Kruachottikul, P., Phanomchoeng, G., Cooharojananone, N., Wongsanao, K., Thabsuwan, S., Suwannatrai, K., Pongsuttisatta, W., Ganyaporngul, S., Kovitanggoon, K. and Vajarodaya, N. April 23-26, 2021 Construction Process Quality Control Assisted Mobile Application, IEEE 8th International Conference On Industrial Engineering And Applications.

Kruachottikul, P., Cooharojananone, N., Phanomchoeng, G. and Kovitanggoon, K., October 14,2021 Development of a User-Centric Bridge Visual Defect Quality Control Assisted Mobile Application: A Case of Thailand’s Department of Highways. Applied Sciences, 11(20), p.9555.

Tiyajamorn, P., Lorprasertkul, Pl, Assabumrungrat, R., Poomarin, w., Chacharoen, R., November 18 2021, Automatic Trash Classification using Convolutional Neural Network Machine Learning, Proceedings of the IEEE 2019th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics. CIS and Ram, pp.71-76, 9095775.

Suthithanakorm, S., Juemjutitam, S., Arunwattanamongkol, N., Pimpin, A., Chancharoen, R., November 18 2021, Temperature Control for Hydrogel Bio-Printing, Proceedings of the IEEE 2019th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics. CIS and Ram, pp.310-315, 9095808.

Asavasirikulkij,. C., Mathong, C., Sinthumongkolchai., T., Chancharoen, R., Asdomwised, W., August 27 2021, Low Latency Peer to Peer Robot Wireless Communication with Edge Computing, 2021 IEEE 11th International Conference on System Engineering and Technology, ICSET 2021- Proceeding, 2021, pp. 100-105 .

Asavasirikulkij, C., Mathong, T., Sinthumongkolchai, T., Chancharoen, R., August 27 2021, A Study of Digital Twin and Its Communication Protocol in Factory Automation Cell, International Conference on Emerging Technologies for Communications.

Charoeythornkhajhornchai P., Charoeythornkhajhornchai P.,Tedsree K., Chancharoen R., September 2021, Effect of carbazole coating on TiO2 nanoparticles as a photosensitizer and MWCNTs on the performance of expoxy composites, Journal of Science: Advanced Materials and Devices, Volume 6, Issue 3, Page 425-434.

Sapthanakorn, P., Salakij, S.,November 20-22 2021, Evaluating the Potential of Using Floating Solar Photovoltaic on 12 Reservoirs of Electricity Generation Authority of Thailand Hydropower Plants, IEEE Xplore, 978-1-6654-1425-/21.

Thuwanut, P., Comizzoli, P., Pimpin, A., Srituravanich, W., Sereepapong, W., Pruksananonda, K., Taweepolcharoen, C., Tuntiviriyapun, P., Suebthawinkul, C., Srayapiwat, P., 2021, Influence of hydrogel encapsulation during cryopreservation of ovarian tissues and impact of post-thawing in vitro culture systems in a research animal model, Clinical and Experimental Reproductive Medicine, JCI = 0.62 (Q3).

Chaudhary S., Wuttisittikulkij L., Saadi M., Sharma A., Al Otaibi S., Nebhen J., Zegarra Rodriguez D., Kumar S., Sharma V., Phanomchoeng G., Chancharoen R., November 15 2021., Coherent detection-based photonic radar for autonomous vehicles under diverse weather conditions., PLos One., ISSN 20763417., Impact Factor 3.240.

Palasuwan D., H.Chalidabhongse T., Chancharoen R., Palasuwan A., Kobchaisawat T., Phanomchoeng G., October 1 2021., G6PD diaxBox:Digital Image Based Quantification of G6PD deficiency., Talanta., ISSN 00399140, 18733573., HI-INDEX 161. Impact Factor Trend 2019 5.339.

Kruachottikul P., Cooharojananone N., Phanomchoeng G., Kovitanggoon K., October 14 2021., Development of a User Centric Bridge Visual Defect Quality 2 Control Assisted Mobile Application : A case of Thailand’s Department of Highways., Applied Sciences., ISSN 20763417., HI-INDEX 52., Impact Factor 2.679.

Rakbangboon T., Guerra G., Kla-Arsa S., Padungjaroen U., Tangpornprasert P., Virulsri C., Sasaki K., 2021., High-Level Mobility of Trans-Tibial Prosthesis Users Wearing Commercial and sPace Energy-Storing Prosthetic Feet., International Journal of Environmental Research and Public Health., Vol,107 (2020); pp.2537-2545., Impact Factor 2021 = 4.614.

Lowattanamart, W., Suttisung, V., Sintragoonchai, S., Phanomchoeng, G. and Jintanawan, T. 11-14 January, 2020. Feasibility on Development of Kinetic-Energy Harvesting Floors, International Conference on Sustainable Energy and Green Technology (SEGT 2019), Thailand.

Sasithong, P., Myint, Y., Krinagprapkit, C., Kertiopas, K., Ullah, I., Wuttisittikulkij, L.Saadi, M., Loetchaipitak, T., Chaipirawat, K. and Chancharoen, R. 19-22 January,2020. 4G Enabled PhoneBot with Cloud-based SLAM, IEEE ICEIC2020 proceeding, Spain.

Sithiwichankit, C. and Chancharoen, R. 21-23 January,2020. Digital Fabrication of a 3D Object using Fixtureless Assembly, The 10th International Conference on Mechatronics and Manufacturing, IOP Conference Series: Materials Science and Engineering, 635 (1), art. no. 012035, DOI: 10.1088/1757-899X/635/1/012035.

Chancharoen, R., Veerakiatkit, P., Kriathkungwalkai, L., Daraseneeyakul, P., Loetchaipitak, T. and Prayongrat, M. 21-23 January,2020. An Accuracy and Repeatability of a Robot made with V-Slot Extrusion with built-in Linear Rails, The 10th International Conference on Mechatronics and Manufacturing, IOP Conference Series: Materials Science and Engineering, 635 (1), art. no. 012025, DOI: 10.1088/1757-899X/635/1/012025.

Phanomchoeng, G., Saadi, M., Sasithong, P., Tangmongkhonsuk, J., Wijayasekara, S. and Wuttisittikulkij, L. 8 February, 2020. Hardware-Software Co-Design of a Farming Robot, Engineering Journal, Vol. 24(1), DOI:10.4186/ej.2020.24.1.199.

Phanomchoeng, G., Chancharoen, R. and Lumia, R. 8 Februry, 2020. Making Undergraduate Labs Challenging and Useful, Engineering Journal, Vol.24(1), DOI:10.4186/ej.2020.24.1.167.

จำเนียรเจริญสุข, ญ., แช่มช้อย, ช., พุทธิวิสุทธิศักดิ์, ส. 2563,7-8 พฤษภาคม. การวิเคราะห์ประสิทธิภาพการใช้พลังงานในโรงงานผลิตกระเบื้องปูพื้นคอนกรีต ด้วยเทคนิคการควบคุมกระบวนการทางสถิติ, การประชุมวิชาการข่ายงานวิศวกรรมอุตสาหการ ครั้งที่ 38 (IE NETWORK 2020), กรุงเทพมหานคร.

สินอุปการ, ก., พุทธิวิสุทธิศักดิ์, ส. 2563,7-8 พฤษภาคม. การศึกษาเชิงเปรียบเทียบข้อกำหนดมาตรฐานการจัดการพลังงานสากล ISO 50001:2018 และกฎหมายการอนุรักษ์พลังงานของประเทศไทย เพื่อการนำไปประยุกต์ใช้สำหรับโรงงาน และอาคารควบคุม, การประชุมวิชาการข่ายงานวิศวกรรมอุตสาหการ ครั้งที่ 38 (IE NETWORK 2020), กรุงเทพมหานคร.

เนติพัติ, ส., พุทธิวิสุทธิศักดิ์, ส. 2563,7-8 พฤษภาคม. การปรับปรุงประสิทธิภาพการใช้พลังงานสำหรับโรงงานระเหยน้ำกากส่า, การประชุมวิชาการข่ายงานวิศวกรรมอุตสาหการ ครั้งที่ 38 (IE NETWORK 2020), กรุงเทพมหานคร.

Kasivitamnuay, J. and Singhatanadgid, P. 2020, 1 March. Object-Oriented Software for Fitness-For-Service Assessment of Cracked Cylinder Based on API RP 579, Frattura ed Integrità Strutturale, 14(52), pp.163-180.

Phuakpunk, K., Chalermsinsuwan, B., Putivisutisak, S. and Assabumrungrat, S. 2020, June. Simulations of sorbent regeneration in a circulating fluidized bed system for sorption enhanced steam reforming with dolomite, Particuology, Vol. 50, pp.156 – 172.

Lowattanamart, W., Suttisung, V., Sintragoonchai, S., Phanomchoeng, G. and Jintanawan, T. 11-14 January, 2020. Feasibility on Development of Kinetic-Energy Harvesting Floors, International Conference on Sustainable Energy and Green Technology (SEGT 2019), Thailand.

Jiranusornkul, N., Kraduangdej, S., Niltawach, N., Pimpin, A. and Srituravanich, W. 2020,10 February. Development of a paper-based pressure sensor fabricated by an inkjet-printed water mask metho, Microsystem technologies-micro-and nanosystems-information storage and processing system, Vol.26, pp. 2117-2121.

Dahlan, M., Sutapun, A. and Sangveraphunsiri, V. 2020, 1 March. A traction controller of a two-wheel mobile robot with feedforward compensator, IOP Conference Series: Materials Science and Engineering, Vol.812, Issue 1.

Noomwongs, N., Bajpai, A., Phutthaburee, P., Wongpiya, L., Skulthai, A., Maung, T.Z.B., Myint, Y.M., Ullah, I., Wuttisittikulkij, L. and Saadi, M. 2020, 19-20 January. Design and Testing of Autonomous Steering System Implemented on a Toyota Ha:mo, 2020 International Conference on Electronics, Information, and Communication (ICEIC), Barcelona, Spain.

Yingprathanphon, P., Wongpakham, T., Srituravanich, W. and Pimpin, A. 2020, 31 Mar. Filling-and-Dragging Technique for A Particle-Entrapment Using Triangular Microwells, Engineering Journal, vol. 24(2), pp. 63-74.

Puthan, P., Jalali, M., Ortiz-Tarin, J.L., Chongsiripinyo, K., Pawlak, G. and Sarkar, S. 2020, May. The wake of a three-dimensional undenwater obstacle: Effect of bottom boundary conditions, Ocean Modelling, p.101611.

Nguyen, D. C., Hoang, A. T., Tran, Q. V., Hadiyanto, H., Wattanavichien, K. and Pham, V. V. 2020, 22 September. A Review on the Performance, Combustion, and Emission Characteristics of Spark-Ignition Engine Fueled With 2,5-Dimethylfuran Compared to Ethanol and Gasoline, Journal of Energy Resources Technology, Vol. 143(4), pp.1-23.

Jintanawan, T., Phanomchoeng, G., Suwankawin, S., Kreepoke, P. and Chetchatree, P. 2020,16 October. Design of Kinetic-Energy Harvesting Floors, Energies, Vol.13(20), 10.3390/en13205419.

Leelaburanathanakul, P., Virangkur, V., Wangsiripaisarn, T., Pitakarnnop, J., and Bunyajitradulya, A., 24-26 September,2020. Steady tangential control jet for improving the effectiveness of a rudder under one-engine inoperative condition, The Second International Conference on Trends in Mechanical and Aerospace Engineering (TMAE 2020), Washington, USA.

Thaitanun, S., Loetthanaphan, S., Wanichanan, S., Myint, Y. M., Phanomchoeng, G., Chancharoen, R., … & Wijayasekara, S. K. July,2020. Multipurpose Agricultural Robot Platform, In IOP Conference Series: Materials Science and Engineering, Vol. 895(1), p. 012008, Chuo University, Tokyo, Japan.

Keeratihattayakorn, S., Tangpornprasert, P., Prasongcharoen, W., and Virulsri, C. 2020,23 March. Out-of-roundness compensation technique in machining of femoral head prosthesis using conventional CNC machine, The International Journal of Advanced Manufacturing Technology, pp.1-9.

Bogajo, I. R., Tangpronprasert, P., Virulsri, C., Keeratihattayakorn, S., and Arrazola, P. J. 2020,20 October. A novel indirect cryogenic cooling system for improving surface finish and reducing cutting forces when turning ASTM F-1537 cobalt-chromium alloys, The International Journal of Advanced Manufacturing Technology, pp.1-19.

Romtrairat, P., Virulsri, C., Wattanasiri, P., and Tangpornprasert, P. 2020, 26 August. A performance study of a wearable balance assistance device consisting of scissored-pair control moment gyroscopes and a two-axis inclination sensor, Journal of Biomechanics, Vol.109.

Pitakwatchara, P. July 23, 2020 . Locomotion generation for a mobile manipulator by global minimization of the weighted generalized momentum, International Journal of Advanced Robotic Systems, Vol.17(4).

Gleebpratum, B. and Salakij, S. 24-26 July, 2020. Thermal Models for Evaporative Cooling on Photovoltaic Panel Attached with a Wetted Salo Fabric, IOP Conference Series: Earth and Environmental Science, Singapore.

Thanakun, P., Kasivitamnuay, J. and Singhatanadgid, P. 24 November, 2020. Optimum design of a ring-shaped clip gauge, Experimental Technques, pp.1-11.

Treetipsounthorn, K., Sriudomporn, T., Phanomchoeng, G., Dengler, C., Panngum, S., Chantranuwathana, S. and Zemouche, A. 2020,10 November. Vehicle Rollover Detection in Tripped and Untripped Rollovers using Recurrent Neural Networks, Advances in Science, Technology and Engineering Systems, Vol. 5(6), P.228-238.

Vitooraporn, C., Tiamsa-ad, U. and Surakampontorn, T. December 1-4,2020 High Efficiency Solar Panel with Heat Pipe, The 11th Thai Society of Mechanical Engineers- International, Ubon Ratchathani, Thailand.

Pultanasarn, P., Thaungwilai, K., Singhatanadgid, P., Prateepsawangwong, B. and Singhatanadgit, W. December, 2020 Composite core-supported stainless steel, Pediatric Dental Journal, Vol. 30, No. 3, pp.200.

Sakarin, S. and Phanomchoeng, G. December 14-16,2020 The development of car tracking system for car sharing business by using, 3rd International Conference on Cyber Physical Systems and IOT(CPSIOT 2020), Bangkok, Thailand.

Chatvichai, M. and Putivisutisak, S. July 15-17, 2020 A Theoretical Desien for Top Loading Bottled Water Cooler Using Vapor Compression Refrigeration, การประชุมวิชาการเครือข่ายวิศวกรรมครื่องกลแห่งประเทศไทย (ME-NETT) ครั้งที่ 34, ประจวบคีรีขันธ์, กรุงเทพมหานคร.

Puttichaem, W., Putivisutisak, S., Boonyongmaneerat, Y. and Vadhanasindhud, P. November 2020, 23 Early development of a shaftless horizontal axis wind turbine for generating electricity from air discharged from ventilation sytems, International Journal of Enerey Research, Wiley & Sons Ltd.

Chancharoen, R., Sithiwichankit, C., Feburary 8 2020, A novel digital discrete manufacturing to build up a 3D-object, Engineering Journal, 2020 24(1) pp”209-220.

Sasithong, P., Myint, Y.M., Kriangprapakit, C., Chancharoen, R., Saadi, M., January 19 2020, Temperature Control for Hydrogel Bio-Printing, 2020 International Conference on Electronics, Information, and Communication, ICEIC 2020, 2020, 9051151.

Parnianifard, A., Zemouche, A., Chancharoen, R., Imarn, M.A., Wuttisittikulkij, L., November 11,2020 Robust optimal design of FOPID controller for five bar linkage robot in a Cyber-Physical System: A new simulation-optimization approach, National Center for Biotechnology Information, e0242613.

Lertnuwat, B., February, 2019. Influence of Viscosity on the Shape of an Air Taylor Bubble in a Stagnant Liquid under Turbulent Condition in Falling Film. International Journal of Applied Mechanics and Engineering, Vol. 24(1), P67-77.

Romtrairat, P., Virulsri, C. and Tangpornprasert, P. March, 2019. An application of scissored-pair control moment gyroscopes in a design of wearable balance assistance device for the elderly.Journal of Biomaterials Applications, Vol.87, pp.183-188.

Ajavakom, N., Srungboonmee, K., Tanadumrongsak, K. and Limsowan, V. April, 2019. Vibrational Analysis on Patellofemoral Joint Degradation of Swine’s Knee. IOP Conference Series: Materials Science and Engineering, Vol.501, Issue1.

ศิรินาถ, อ., แช่มช้อย, ช. และ พุทธิวิสุทธิศักดิ์, ส. พฤษภาคม 21-24, 2562. การปรับปรุงประสิทธิภาพพลังงานของระบบอากาศอัดโดยการตั้งค่าความดันที่เหมาะสม, การประชุมวิชาการเครือข่ายพลังงานแห่งประเทศไทย ครั้งที่ 15, โรงแรมเดอะกรีนเนอรี่ รีสอร์ท เขาใหญ่, นครราชสีมา.

ชยเดชานนท์, ภ., แช่มช้อย, ช. และ พุทธิวิสุทธิศักดิ์, ส. พฤษภาคม 21-24, 2562. การวิเคราะห์ประสิทธิภาพพลังงานของโรงงานผลิตผลไม้บรรจุกระป๋อง, การประชุมวิชาการเครือข่ายพลังงานแห่งประเทศไทย ครั้งที่ 15, โรงแรมเดอะกรีนเนอรี่ รีสอร์ท เขาใหญ่, นครราชสีมา.

มังครักษ์, ป., แช่มช้อย, ช. และ พุทธิวิสุทธิศักดิ์, ส. พฤษภาคม 21-24, 2562. รูปแบบการจัดวางแผงโซล่าเซลล์ที่เหมาะสมต่อการผลิตไฟฟ้าสำหรับอาคาร, การประชุมวิชาการเครือข่ายพลังงานแห่งประเทศไทย ครั้งที่ 15, โรงแรมเดอะกรีนเนอรี่ รีสอร์ท เขาใหญ่, นครราชสีมา.

Tangvotkhajorn, W., Putivisutisak, S. and Assahumrungrat, S. May 14-16, 2019. A Numerical investigation on the effect of branched V-ribs design in a rectangular duct on heat transfer and pressure drop, The 5th Sustainable Thermal Energy Management International Conference (SusTEM2019), Holiday Inn City Center, Hangzhou, China.

Singhatanadgid, P. and Singhanart, T. 2019. The Kantorovich method applied to bending, buckling, vibration, and 3D stress analyses of plates: A literature review. Mechanics of Advanced Materials and Structures, Vol. 23, No.2, pp.170-188.

Chartsiriwattana, P. and Salakij, S. Jul 2-5, 2019. STUDY OF ASYMMETRY CONFIGURATION EFFECTS ON PLATE HEAT EXCHANGER PERFORMANCE, The 33rd Conference of The Mechanical Engineering Network of Thailand, Udon Thani.

Klewthnong, C., Salakij, S. and Kwanmuang, S. Jul 2-5, 2019. The Investigation of the probability of applying cloth for water absorption to enhance heat transfer for the solar cell, The 33rd Conference of The Mechanical Engineering Network of Thailand, Udon Thani.

วิทูราภรณ์, ช. และ แสงวิเชียรกิจ, ต. กรกฎาคม 2-5, 2562. การศึกษาวิธีการออกแบบระบบท่อลมที่คำนึงถึงผลของการรั่วและการสูญเสียความร้อนของลมภายในท่อ, การประชุมเครือข่ายวิศวกรรมเครื่องกลแห่งประเทศไทย ครั้งที่ 33, อุดรธานี.

Noomwongs, N. and Somboon, P. เมษายน 1-4, 2562. Study on Drowsy Driving Behavior from Driver Steering Pattern and Lane Offset Using Driving Simulator, 20th Asia-Pacific Automotive Engineering Conference, Impact Arena, Muang Thong Thani, Bangkok, Thailand.

Eiammanussakul, T. and Sangveraphunsiri, V. August 8, 2019. Mechanical Power to Identify Human Performance for a Lower Limb Rehabilitation Robot, Engineering Journal, Vol. 23 Issue 4., DOI:10.4186/ej.2019.23.4.91

Kruachottikul, P., Cooharojananone, N., Phanomchoeng, G., Chavarnakul, T., Kovitanggoon, K., Trakulwaranont, D., and Atchariyachanvanich, K. October 23-25, 2019. Bridge Sub Structure Defect Inspection Assistance by using Deep Learning. In 2019 IEEE 10th International Conference on Awareness Science and Technology (iCAST), pp. 1-6, Morioka, Japan.

Dengler, C., Treetipsounthorn, K., Chantranuwathana, S., Phanomchoeng, G., Lohmann, B. and Panngum, S. November 18-20, 2019. Vehicle rollover detection using recurrent neural networks, The 9th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 9th IEEE International Conference on Robotics, Automation and Mechatronics (RAM), Bangkok, Thailand.

Tepkasetkul, N., Kittichokwattana, T., Rattanarueang, N., Saadi, M., Pimpin, A. and Phanomchoeng, G. November 18-20, 2019. Exploring the Best Environmental Conditions for the Growth of Butterhead Lettuce in a Closed System, The 9th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 9th IEEE International Conference on Robotics, Automation and Mechatronics (RAM), Bangkok, Thailand.

Sitthiracha, S., Koetniyom, S. and Phanomchoeng, G. December 11-13, 2019. Combination of Active Braking and Torque Vectoring in Electronic Stability Control for Four-Wheel Independent Drive Electric Vehicle, 2019 Research, Invention, and Innovation Congress (RI2C 2019), Bangkok, Thailand.

Subsamart, N. and Vitooraporn, C. 10-13 December, 2019. Development on Design of Optimum Contra-Rotating Propellers under Slipstream Contraction Condition, The 10th Thai Society of Mechanical Engineers, International Conference on Mechanical Engineering (TSME – ICoME 2019), A-ONE The Royal Cruise Hotel Pattaya, Thailand.

Khamporn, N. and Chaiyapinunt, S. 10-13 December, 2019. An experimental study of human local thermal discomfort from the glass window with a Venetian blind in a tropical climate, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand.

Dettachai, K., Alongkorn, P., Tongmanee, T., Bhanpattanakul, S., Piyaviriyakul, P., Srituravanich, W., Sripumkhai, W., Jeamsaksiri, W. and Sailasuta, A. 1 December, 2019. A Potential Application of Triangular Microwells to Entrap Single Cancer Cells: A Canine Cutaneous Mast Cell Tumor Model, Micromachines 2019, Vol.10(12).

Jaingam, U., Salakij, S. and Manewattana, T. 10-13 December, 2019. Comparison energy consumption between VRF system and Chilled water system in case study of the Chamchuri 10 Building, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand.

Chauykaew, T. and Salakij, S. 10-13 December, 2019. Temperature Synchronization in Two Adjacent Cavities with Operating Heaters, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand.

Suwannaphan, T., Srituravanich, W., Sailasuta, A., Piyaviriyakul, P., Bhanpattanakul, S., Jeamsaksiri, W., Sripumkhai, W. and Pimpin, A. 12 November, 2019. Investigation of Leukocyte Viability and Damage in Spiral Microchannel and Contraction-Expansion Array, Micromachines 2019, 10(11).

Tongmanee, T., Srituravanich, W., Sailasuta, A., Sripumkhai, W., Jeamsaksiri, W., Morimoto, K., Suzuki, Y. and Pimpin, A. 6 November, 2019.Effects of the cell and triangular microwell size on the cell-trapping efficacy and specificity, Journal of Mechanical Science and Technology, https://doi.org/10.1007/s12206-019-1050-2.

Puttichaem, W., Boonyongmaneerat, Y., Vadhanasindhu, P. and Putivisutisak, S. 2019, 11-14 December. Performance of the prototype shaftless small scale horizontal wind turbine for electricity generating from industrial exhaust air system, International Conference on Sustainable Energy and Green Technology 2019 (SEGT 20I9), 159042, pp.1-7.

Dahlan, M., Sutapun, A. and Sangveraphunsiri, V. 2019, 1 November. Simple discrete time traction control for a two-wheeled mobile robot, IOP Conference Series: Materials Science and Engineering, Vol.707.

Suthithanakom, S., Juemjutitam, S., Arunwattanamongkol, N., Wongpakham, T., Pimpin, A. and Chancharoen, R. 2019, November. Temperature Control for Hydrogel Bio-Printing, IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM), pp. 310-315.

Banchajarurat, C., Rajatavarn, C., Chancharoen, R., Srituravanich, W. and Pimpin, A. 2019, November. Development of Smart Diaper with 3D Printed Sensor-Supporter for Elderly Care, 12th Biomedical Engineering International Conference (BMEiCON), pp. 1-4.

Ortiz-Tarin, J.L., Chongsiripinyo, K.C. and Sarkar, S. 2019, 25 September. Stratified flow past a prolate spheroid, Physical Review Fluids, Vol.4, No.9, p.094803.

Keeratihattayakorn, S., Virulsri, C., Ophaswongse, C., and Tangpornprasert, P. 2019,13 Sep. Design and evaluation of a hydraulic mechanism with available components for passive knee prostheses, Disability and Rehabilitation: Assistive Technology, pp1-8.

Lertnuwat, B., 14 Mar, 2018. Shapes of an air taylor bubble in stagnant liquids influenced by different surface tensions. International Journal of Applied Mechanics and Engineering, Volume 23(1) , Page 79-90.

Punpattanakul, K., Kraduangdej, S., Jiranusornkul, N., Chiaranairungroj, M., Pimpin, A., Palaga, T. and Srituravanich, W., April, 2018. A novel patterning method for three-dimensional paper-based devices by using inkjet-printed water mask. Cellulose, pp.1-7.

Eiammanussakul, T., and Sangveraphunsiri, V., 1 April, 2018. A lower limb rehabilitation robot in sitting position with a review of traning activities. Journal of Healthcare Engineering, Vol. 2018, 18 pages.

Ountaksinkul, K., Jiwanuruk, T., Kasempremchit, N., Vas-Umnuay, P., Bumroongsakulsawat, P., Putivisutisak, S., Assabumrungrat, S., 7-8 February, 2018. Performance comparison of different membrane micro-channel reactors for methanol production from biogas and hydrogen. PACCON, Songkla, Thailand.

ตุลยวัต แสงวิเชียรกิจ และ เชิดพันธ์ วิทูราภรณ์, 3-6 กรกฎาคม, 2561. การพัฒนาแบบจำลองของท่อลมที่คำนึงถึงการรั่วและการสูญเสียความร้อนของลมภายในท่อและการพัฒนาโนโมแกรมเพื่อหาคำตอบของแบบจำลอง. การประชุมวิชาการเครือข่ายวิศวกรรมเครื่องกลแห่งประเทศไทย ครั้งที่ 32, มุกดาหาร, ประเทศไทย.

Ponchai, N., Phraeknanthoe, J. and Ratanasumawong, C., 30 Mar, 2018. Spur and Helical Gear Sliding Loss Model with Load Distribution Pattern on Gear Tooth Surface. Engineering Journal, 22(No. 2), pp.101-115.

Mongkol, K., Assabumrungrat, S., and Putivisutisak, S., 2018. Internal Circulation Characteristics of Slug Flow for Liquid-Liquid Extraction inScaled-up Microchannel. ME-NETT 2018, Mukdahan, Thailand.

Wattanasiri, P., Tangpornprasert, P., & Virulsri, C., 2018. Design of Multi-Grip Patterns Prosthetic Hand with Single Actuator. IEEE Transactions on Neural Systems and Rehabilitation Engineering.

Tantavisut, S., Lohwongwatana, B., Khamkongkaeo, A., Tanavalee, A., Tangpornprasert, P., & Ittiravivong, P., 3, July–September 2018. The novel toxic free titanium-based amorphous alloy for biomedical application. Journal of Materials Research and Technology, 7(3), 248-253.

Toolpeng, S., Wannapoporn, K., Phanomchoeng, G., 12-14 October, 2018. Thai License Plate Recognition Algorithm with Service Routine Procedure for Automatic Barrier Gate. 2018 3rd International Conference on Mechatronics and Eletrical Systems, Bangkok, Thailand.

Chaiyapinunt, S., Jenpanitcheep, A., Pornprayoonchai, N., and Khamporn, N., 11-14 December, 2018. An experimental study on the thermal comfort condition for a seated person near a glass window with a venetian blind in between. The 9th TSME International Conference on Mechanical Engineering. Phuket, Thailand.

Chantranuwathana, S., Chancharoen, R., Wannasuphoprasit, W., Sripakagorn, A., And Noomwongs, N., 30 September, 2018. Tire-Suspension-Steering Hardware-in-the-Loop. Engineering Journal, (Vol.) 22, Issue 5.

Boonchai, L., December, 2018. Influence of Liquid Viscosity on the Taylor Bubble Shape Under a Laminar Condition in the Falling Film Region and a Constant Froude Number. International Review of Mechanical Engineering, Vol12(12), P957-964.

Singhatanadgit, W., Toso, M., Pratheepsawangwong, B., Pimpin, A. and Srituravanich, W. December 5, 2018. Titanium dioxide nanotubes of defined diameter enhance mesenchymal stem cell proliferation via JNK- and ERK-dependent up-regulation of fibroblast growth factor-2 by T lymphocytes, Journal of Biomaterials Applications, Vol 33, Issue 7,pp997-1010.

Suwannaphan, T., Pimpin, A., Srituravanich, W., Sailasuta, A., Kaewamatawomg, T., Jeamsaksiri, W., Sripumkhai, W., Piyaviriyakul, P. and Bhanpattanakul, S. November 21-24, 2018. Investigation of Leukocyte Viability in A Setup of Spiral Microchannel for Cell Sorting Application, IEEE BMEiCON 2018, Thailand.

Phanomchoeng, G., Chancharoen, R. and Lumia, R., 08 February, 2017. Developing vibrotactile haptic stimuli based on measured human capabilities. Virtual Reality, pp.1-10.

Pimpin, A., Charoenbunyarit, I. and Srituravanich, W., 1 January, 2017. Material and performance characterization of Z-shaped nickel electrothermal micro-actuators. Sensors and Actuators A: Physical, 253, pp.49-58.

Jiwanuruk, T., Putivisutisak, S., Bumroongsakulsawat, P., Tagawa, T., Yamada, H., and Assabumrungrat, S., 22-24 March, 2017. Design of thermally coupled monolithic membrane reformer as portable hydrogen production system. CUVC, Bangkok, Thailand.

Phanomchoeng, G., and Chantranuwathana, S.,28 March, 2017. Road Surface Condition Detection in Bicycle for Active Safety Applications, No. 2017-01-1730, SAE Technical Paper.

Pongpetrarat, P., Arunrat, J., Sangkhaman, P., Nilsumrit, P., Chemhengcharoen, P., Visitsara-at, S., Chanchareon, R. and Phanomchoeng, G., April, 2017. Full sphere recognition enhancement with cast shadow images. In Control and Robotics Engineering (ICCRE), 2017 2nd International Conference on (pp. 222-226). IEEE.

Yu, N., Salakij, S., Chavez, R., Paolucci, S., Sen, M. and Antsaklis, P., 2017. Model-based predictive control for building energy management: Part II–Experimental validations. Energy and Buildings, 146, pp.19-26.

Ruangkumhai, A., Noomwongs, N., 2017. Distance Estimation with Car Detection Algorithm for Lane Change System Considering Minimum Longitudinal Safety Spacing. JSAE KANTO, Tokyo, Japan.

Kasetsirikul, S., Srituravanich, W., Piyaviriyakul, P., and Pimpin, A., 2017. Separation of Magnetic Particles Using an Array of Magnets—A Model of a Separation Device for Malaria-Infected Blood Cells. Sensors and Materials, 29(3), pp.281-291.

Lertnuwat, B., 2017, A Study of Taylor Shapes in Stagnant Water Affected by Pipe Diameters and the Froude Number. International Review of Mechanical Engineering.

Kasivitamnuay, J., and Singhatanadgid, P., August, 2017, Scaling Laws for Displacement of Elastic Beam by Energy Method. International Journal of Mechanical Sciences, Volumes 128–129, Pages 361-367.

PHANOMCHOENG, G., CHANCHAREON, R., 15 June, 2017. Adaptive Gain Control for a Two-Axis, H-Frame-Type, Positioning System. Engineering Journal, 21(3), pp. 223-234.

Phanomchoeng, G., Zemouche, A. and Rajamani, R., 2017, May. Real-time automotive slip angle estimation with extended H∞ circle criterion observer for nonlinear output system. In American Control Conference, ACC 2017.

Kamnerdsook, A., Srituravanich, W., Pimpin, A., Sailasuta, A., Piyaviriyakul, P., Jeamsaksiri, W., and Sripumkhai, W., 31 August-2 September, 2017.Design of Contraction-Expansion Microchannels for Particle-Sorting with Five-Mcrometer Resolution.BMEiCON, Sapporo, Hokaido, Japan.

Tessathan, T., Thammasiri, C., De Silva, P., Hussain, R. and Noomwongs, N., 28 March, 2017. Cabin-Ambient Air Exchanges and Their Relation to In-Vehicle CO 2 Concentration, No. 2017-01-1725, SAE Technical Paper.

Phanomchoeng, G., Zemouche, A. and Rajamani, R., 2017, May. Real-time automotive slip angle estimation with extended H∞ circle criterion observer for nonlinear output system. In American Control Conference, IEEE, pp. 1636-1641.

สรัล ศาลากิจ and สุทธิศักดิ์ พรหมทอง, 2017. การศึกษาพลศาสตร์ของไหลเชิงคำนวณของผลของขนาดมุมกรวยต่อประสิทธิภาพการแยกของไฮโดรไซโครนของเหลว-ของเหลว-ของแข็งแบบทรงกรวยสองชิ้นต่อกัน. การประชุมวิชาการเครือข่ายวิศวกรรมเครื่องกลแห่งประเทศไทย ครั้งที่ 31, นครนายก, ประเทศไทย.

ศิวพล ฉายแก้ว, ธนพร เสาวรัตน์ชัย, วีระยุทธ ศรีธุระวานิช and อลงกรณ์ พิมพ์พิณ, 4-7 กรกฎาคม, 2017. การทดสอบไมโครแอคชัวเอเตอร์แบบนิวมาติกส์ที่สร้างด้วยเทคนิคชั้นสังเวย. การประชุมวิชาการเครือข่ายวิศวกรรมเครื่องกลแห่งประเทศไทย ครั้งที่ 31, นครนายก, ประเทศไทย.

Suphama, P., Maneeratana, K., Chancharoen, R., 2017.Positioning of fused deposition features on primitives, Journal of Engineering and Applied Sciences, pp.3818-3823.

ไพรัช ตั้งพรประเสริฐ,ชัญญาพันธ์ วิรุฬห์ศรี, ธนชาติ ธนากรพิพัฒนกุล, จิรณัฐ มานุ้ย และ ดนุพงษ์ บุตรทองคำ,2017. Engineering & Technical Education for Sufficiency Economy. การประชุมวิชาการครุศาสตร์อุตสาหกรรมระดับนานาชาติ ครั้งที่ 5, กรุงเทพมหานคร, ประเทศไทย.

Zemouche, A., Rajamani, R., Phanomchoeng, G., Boulkroune, B., Rafaralahy, H. and Zasadzinski, M., November, 2017. Circle criterion-based ℋ∞ observer design for Lipschitz and monotonic nonlinear systems–Enhanced LMI conditions and constructive discussions. Automatica, Vol. 85, pp.412-425.

Phanomchoeng, G. and Chanchareon, R., 15 Jun, 2017. Adaptive Gain Control for a Two-Axis, H-Frame-Type, Positioning System. Engineering Journal (Eng. J.), 21(3), pp.223-234.

Subsamart, N., Vitooraporn, C., 12-15 December, 2017. Design of optimum contra-rotating propellers under slipstream contraction condition. TSME, Bangkok, Thailand.

Thanormsridetchai, A., Ketpun, D., Srituravanich, W., Piyaviriyakul, P., Sailasuta, A., Jeamsaksiri, W., Sripumkhai, W. and Pimpin, A., November, 2017. Focusing and sorting of multiple-sized beads and cells using low-aspect-ratio spiral microchannels. Journal of Mechanical Science and Technology, 31(11), pp.5397-5405.

Jiwanuruk, T., Putivisutisak, S., Vas-Umnuay, P., Bumroongsakulsawat, P., Cheng, C.K. and Assabumrungrat, S., 19 November, 2017. Modeling of thermally-coupled monolithic membrane reformer for vehicular hydrogen production. International Journal of Hydrogen Energy, 42(42), pp.26308-26319.

Chaiyapinunt, S. and Khamporn, N., 12-15 December, 2017. Analysis on thermal condition for a person sitting near a glass window. TSME, Bangkok, Thailand.

Buttongkum, D., Tangpornprasert, P. and Virulsri, C., 23 November 2017. Design and Evaluation of ESR Prosthetic Foot with High Energy Storage. ICTechEd, Bangok, Thailand.

Tanakornpipattanakul, T., Tangpornprasert, P. and Virulsri, C., 23 November 2017. Design of Locking Mechanism on Acetabular. ICTechEd, Bangok, Thailand.

Manui, J., Tangpornprasert, P. and Virulsri, C., 23 November 2017. Design of Simple Hydraulic System in Hydraulic Prosthetic Knee. ICTechEd, Bangok, Thailand.

กิตติณัฐ ชูเดช และ สมพงษ์ พุทธิวิสุทธิศักดิ์, 23-24 พฤศจิกายน 2560. การจัดการพลังงานสำหรับอาคารเรียนเดิม กรณีศึกษาอาคารวิศวกรรมศาสตร์ 3. การประชุมประจำปีเครือข่ายมหาวิทยาลัยยั่งยืนแห่งประเทศไทย ครั้งที่ 2, กรุงเทพฯ, ประเทศไทย.

ศราวุฒิ กวานตระกูล และ สมพงษ์ พุทธิวิสุทธิศักดิ์, 23-24 พฤศจิกายน 2560. ค่าดัชนีการใช้พลังงานจำเพาะของร้านสะดวกซื้อในพื้นที่ กรุงเทพมหนคร. การประชุมประจำปีเครือข่ายมหาวิทยาลัยยั่งยืนแห่งประเทศไทย ครั้งที่ 2, กรุงเทพฯ, ประเทศไทย.

Maneeratana, K., Tiamsa-Ad, U., Ruengsomboon, T., Chawalitrujiwong, A., Aksomsiri, P. and Asawapithulsert, K., 2017, December. Class-wide course feedback methods by student engagement program. In Teaching, Assessment, and Learning for Engineering (TALE), 2017 IEEE 6th International Conference, pp. 393-398.

Chancharoen, R., Maneeratana, K. and Anantasetthakul, P., 2017, December. A quick prototyping project for first year engineering students. In Teaching, Assessment, and Learning for Engineering (TALE), 2017 IEEE 6th International Conference on (pp. 503-508). IEEE.

Pitakwatchara, P., 2017. Wave Correction Scheme for Task Space Control of Time-Varying Delayed Teleoperation Systems. IEEE Transactions on Control Systems Technology, VOL. 26, NO.6.

Pimpin, A., and Srituravanich, W., 31 Jan, 2017. Modification of a Substrate Roughness for a Fabrication of Freestanding Electroplated Metallic Microstructures. ENGINEERING JOURNAL, 21(1).

Salakij, S., Yu, N., Paolucci, S. and Antsaklis, P., 2016. Model-Based Predictive Control for building energy management. I: Energy modeling and optimal control. Energy and Buildings, 133, pp.345-358.

Singhatanadgit, W., Junkaew, P. and Singhatanadgid, P., 2016. Effect of bidirectional loading on contact and force characteristics under a newly developed masticatory simulator with a dual-direction loading system. Dental Materials Journal, 35(6), pp.952-961.

Phanomchoeng, G., Chancharoen, R., Kwanmuang, S. and Maneeratana, K., December, 2016. Successive build up lab for learning mechatronics. In Teaching, Assessment, and Learning for Engineering (TALE), 2016 IEEE International Conference on (pp. 93-100).

คณิต วัฒนวิเชียร และ พรหมรักษา ฤทธิประเสริฐมณี, กรกฎาคม – กันยายน, 2016. การเปรียบเทียบผลของเชื้อเพลิงดีเซลสังเคราะห์จากน้ำมันพืชใช้แล้ว (HiBD) และเชื้อเพลิงดีเซลเชิงพาณิชย์ (CD) ที่มีต่อการสิ้น เปลืองเชื้อเพลิง และมลพิษของรถยนต์. วิศวกรรมสาร ม ก.(Kasetsart Engineering Journal), 29(97), pp.13-24.

Chaiyapinunt, S., Ruttanasupa, P., Ariyapoonpong, V. and Duanmeesook, K., 15 October, 2016. A shadow-ring device for measuring diffuse solar radiation on a vertical surface in a tropical zone. Solar Energy, 136, pp.629-638.

Ruangkumhai, A., and Noomwongs, N., 13-16 December, 2016. Distance Estimation with Car Detection Algorithm for Lane Change Assist System. TSME, Chiangmai, Thailand.

Larbwisuthisaroj, S., and Noomwongs, N., 13-16 December, 2016. Study on the effect of driver reaction times to the collision possibility and evasion ability due to the forward collision warning system using driving simulator. TSME, Chiangmai, Thailand.

Wattanavichien, K., 24-25 November, 2016.  Potential of Waste Plastic Synthetic Diesel for a small Diesel Power Generation. Aun/SEED-Net Regional Conference on Energy Engineering 2016, Phnom Penh,Combodia.

Na Takuathung, I., and Bunyajitradulya, A., 13-16 December, 2016. Structures Jet and Crossflow Interactions and Cross Plane Entrainment Mechanisms of Jet and Controlled Jet in Crossflow. TSME, Chiangmai, Thailand.

Pruekwatana, A., Sornphrom, K., Tekhuad, C., Wongthongsiri, K., Soupramongkol, P., Wangkiat, S., and Bunyajitradulya, A., 13-16 December, 2016. Scaling-Power Law Correlations for Collapsing the Effects of the Effective Velocity Ratio on Jet-Fluid Mixture Trajectory Circulation and Entrainment of Jets in Crossflow. TSME, Chiangmai, Thailand.

Lobtum, V., Pimpin, A., Srituravanich, W., and Saovaratchai, T., 13-16 December, 2016. The effects of pulse-current electrodeposition of nickel on a surface roughness and current efficiency. TSME, Chiangmai, Thailand.

Sompopskuk, P., Assabumrungrat, S., and Putivisutisak, S., 13-16 December, 2016. Computation of Interfacial Area and Mean Residence Time of Two-Immiscible-Liquid Mixing in a Spinning Dise Reactor. TSME, Chiangmai, Thailand.

Maneeratana, K., Singhanart, T., and Singhatanadgid, P., December, 2016. A preliminary study on the utilization and effectiveness of a flipped classroom in Thailand. In Teaching, Assessment, and Learning for Engineering (TALE), 2016 IEEE International Conference on (pp. 345-352).

Chancharoen, R., and Maneeratana, K., 2016, December. A prototype project with a new workspace for Mechanics of Machinery. In Teaching, Assessment, and Learning for Engineering (TALE), IEEE International Conference, pp. 202-209.

Mama, W., Pimpin, A., Srituravanich, W., Itthipanichpong, R., Manassakorn, A., Tantisevi, V., and Rojanapongpan, P., 13-16 December, 2016. Development of Photopolymerized Polyethylene Glycol Diacrylate Micro-tubes for Glaucoma Treatment. TSME, Chiangmai, Thailand.